Features:
1. High-speed feeding (up to 1200 times per minute), strive to increase production capacity, the most suitable for a variety of production:
2. It is suitable for feeding and processing of ultra-thin (0.1-1.6mm thick) materials. The supply is stable and the feeding distance is more accurate:
3. Since the clip-type feeding is face-to-face contact, it will not leave any indentation on the surface of the material. It is suitable for punching electroplating materials of aluminum alloy, stainless steel, copper, iron or secondary engineering manufacturers to obtain perfect stamping products:
4. The belt type transmission and scale adjustment are adopted. The operation is simple and the stability is good. Any person can easily operate;
? ? ? a. The plate thickness adjustment only needs to rotate the scale according to the material;
? ? ? b. The adjustment of the relaxation device only needs to rotate the scale according to the position of the guide tip in the mold;
? ? ? c. The feeding length is adjusted by the crankshaft eccentricity (block gauge method is also available);
5. The body is integrally formed, which can avoid the resonance generated during stamping and ensure the stability of long-term feeding accuracy;
6. When the clip feeder is running, it is quiet and silent, and will not cause any noise in the workplace.


Some of the products that can be punched by the feeder are as follows:

????

LED lead frame? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? Relay shrapnel? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? Precision connector

????

Transformer, motor core? ? ? ? ? ? ? ? ??Chip heat sink? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ?Integrated circuit lead frame

Our company can provide customized services according to the materials, if you need, please call 13580817073 for consultation.